| PRODUCTS > ENERGY MANAGEMENT |
| |
| Electricity meters |
|
Meters М100 series
Static, single-phase, two-rate electricity meters for active energy and direct connection
| • |
Accuracy Class 1 |
| • |
Bi-directional registration of energy |
| • |
Indication for wrong connection |
| • |
Electrical impulse output to systems for remote reading of energy consumption |
| • |
Communication according to ANSI/EIA-709 standard |
| • |
Compact dimensions 165х88х45 mm |
| • |
Light and sturdy case meeting UL94 V0 |
| • |
In compliance with BDS EN 61036 + А1:2001 |
|
 |
| More information: Datasheet PDF |
| |
| |
Meters SМ100 series
Static, single-phase, multi-rate electricity meters for direct connection and remote reading.
| • |
Accuracy Class 1 |
| • |
Bi-directional registration of energy |
| • |
Indication for wrong connection |
| • |
LCD display |
| • |
Remote reading of consumed energy |
| • |
Communication according to ANSI/EIA-709 standard |
| • |
Compact dimensions 165х88х45 mm |
| • |
Light and sturdy case meeting UL94 V0 |
| • |
In compliance with BDS EN 61036 + А1:2001 |
|
 |
| More information: Datasheet PDF |
|
| EM-1021 Single-Phase IEC Residential Electricity Meter |
 |
| • |
Intelligent, fully featured electronic meter with integrated disconnect and information display for single phase operation |
| • |
Operates autonomously and communicates with Echelon NES DC-1000 Data Concentrators via Echelon CENELEC A-band compliant power line communications channel with automatic repeating function |
| • |
Measures active power, active energy, reactive power, reactive energy, RMS voltage, RMS current, and power factor |
| • |
Two optional input channels capture data from external devices such as gas or water meters |
| • |
Times-of-use metering with up to four tariffs and custom billing cycles |
| • |
Power quality measurements and extensive tamper detection features |
| • |
Optional M-Bus support for communicating with up to four external devices |
|
| More information: Datasheet PDF |
|
| |
EM-1023 Poly-Phase IEC Residential Electricity Meter
| • |
Intelligent, fully featured electronic meter with integrated disconnect and information display for 1, 2, and 3 phase operation |
| • |
Operates autonomously and communicates with Echelon NES DC-1000 Data Concentrators via Echelon CENELEC A-band compliant power line communications channel with automatic repeating function |
| • |
Measures active power, active energy, reactive power, reactive energy, RMS voltage, RMS current, and power factor |
| • |
Two optional input channels capture data from external devices such as gas or water meters |
| • |
Times-of-use metering with up to four tariffs and custom billing cycles |
| • |
Power quality measurements and extensive tamper detection features |
| • |
Optional M-Bus support for communicating with up to 4 external devices |
|
 |
| More information: Datasheet PDF |
|
| |
DC-1000 Data Concentrator
Data concentrators manage devices on the power line network and provide the connectivity infrastructure between meters and the NES System Software.
|
| • |
Manage up to 1,024 NES meters and 4,096 associated M-Bus devices |
| • |
Automatically discover meters on installation and as the result of dynamic network topology changes |
| • |
Collect and report meter data, including consumption and power quality |
| • |
Can be installed at any point in the low voltage network topology, including behind a poly-phase, transformer-operated or single-phase meter, to allow optimal modem connectivity and minimal installation costs |
| • |
Internal modem bay accepts and powers readily-available standard wired and wireless modems |
| • |
Communicate with the NES System Software using standard TCP/IP-capable wide area networks such as GSM, GPRS, CDMA, Ethernet, and traditional analog telephone service |
| • |
Use authenticated and encrypted transactions with devices for enhanced power line communications security |
|
 |
| More information: Datasheet PDF |
^ top page |
 |
| ECAS® System |
| ECAS® is a system for real time control and reporting of electrical energy consumption of subscribers based on LonWorks® technology. ECAS®is a hierarchical data acquisition and control system on two levels – control post and distributed objects (power transformers’ kiosks with the distribution network attached to them). |
 |
| The two-way data communication between the levels can be carried out via twisted pair, low voltage power line, radio channel, GSM, wireless LAN etc. |
Main functions:
| • |
Automatic, remote reading of meters’ registers and status |
| • |
Remote switching on/off of the subscribers’ electricity supply |
| • |
Supervision of the state of the equipment in the distribution panels and the way of exploitation of them by the subscribers |
| • |
Setting limits for the electrical power usage and disconnection when the set limit is exhausted |
|
| |
| More information: Datasheet PDF |
^ top page |
|
| GSM/GPRS Modems |
| |
| AMC 190(G) |
 |
| The dual-band GSM modem type AMC 190(G) is suitable for meters of different energy types (electricity, gas, heat and water) due to its transparent mode for data transmission, the multitude of available interfaces and various options for mounting. |
| • |
Possible interfaces – CL1, RS-232 full handshake and RS-485 (half and full duplex) |
| • |
Data transmission maximum 115200 bits/s at device side |
| • |
Wide-range power supply from 90 to 264 VAC |
| • |
Three point or terminal cover mounting possible with DIN 43861 mounting |
|
| More information: Datasheet PDF |
| |
| |
| |
^ top page |
|
| SKALAR Devices |
| |
| The Skalar is a communication computer, equipped with state of the art IP technology and loadable software modules. A high-capacity 32 bit microprocessor system with 1 Mbyte RAM and 2 Mbyte Flash memory and a real-time multi-task operating system are the core of Skalar. |
| Regardless of where Skalar is applied, it always adapts itself to its tasks. This can be a simple data transfer, the processing of measuring data, a plausibility check on site, error detection etc. The intelligence is remotely configured in the device thereby eliminating costly on-site inspections. |
 |
| • |
Communication with one or more remote stations ensures optionally over GSM/GPRS, RSTN, ISDN or Ethernet. |
| • |
A transparent intelligent data modem with IEC 1107 protocol support is implemented as the first application in the base devices |
| • |
Integrated optional interfaces - CL1, RS232, RS485 or Mbus |
|
| More information: Datasheet PDF |
| |
| |
^ top page |
|
| Software |
| |
| GEMS |
| Gorlitz Energy Monitoring System (GEMS) is a software tool for acquisition, display and management of load profile data. |
 |
| • |
Based on an industrial standard data base according to Microsoft Access format |
| • |
Standard license allows the simultaneous acquisition for 20 load profiles |
| • |
Data transfer for measurement data is done using FTP (File Transfer Protocol) |
| • |
Data can be displayed as table, line graph or statistics |
| • |
Compatibility – measurement devices, which can be accessed by the FTP-features of intelligent modems AMC 190(G) and SKALAR, can be used as primary data sources
for GEMS. |
|
| More information: Datasheet PDF |
| |
| |
| EDW3000 |
Gorlitz system EDW3000 provides solutions for the tasks retrieval, checking, management and distribution of energy data and its related areas. It maps explicitly the process from measuring to billing for the purposes of the grid operator and energy supplier.
Automatic meter reading, manual meter reading, meter and device management, plausibility,
the generation of true and verifiable billing data together with their management and
distribution are the core functions of the EDW3000. |
 |
| More information: Datasheet PDF |
| |
| |
| |
| |
| |
^ top page |
